The Daily Insight

Home / general

How do I edit a smart dimension in Solidworks

Isabella Campbell |

Double-click a dimension. The Modify dialog box appears.Change the dimension value with the arrows, thumbwheel , mouse wheel, or by typing in the dimension box. … Choose from: … Use the buttons as follows:

How do I edit a dimension in SOLIDWORKS?

To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel, mouse wheel, or by typing in the dimension box.

How do I change a smart dimension to a diameter in SOLIDWORKS?

Simply click on the dimension, choose the ‘Leaders’ tab in the PropertyManager for the dimension and choose the diameter or radius button.

How do you delete a smart dimension in SOLIDWORKS?

To remove a dimension from a drawing: Select a dimension and press Delete. Be careful not to delete any dimension that has a reference, such as one used in a note.

How do you override a dimension in SOLIDWORKS?

Click Options (Standard toolbar) or Tools > Options. On the System Options tab, select Sketch. Select Override dimensions on Drag/Move and click OK.

How do I change units in SOLIDWORKS?

It is sometimes required to change the unit system of a particular file. This can be done by changing the Units settings from Tools > Options > Document Properties > Units. The same menu can be accessed in the bottom right hand corner of the SOLIDWORKS window.

How do you fix a dimension in SOLIDWORKS?

  1. Select the spline to dimension.
  2. Click Smart Dimension (Dimensions/Relations toolbar) or Tools > Dimensions > Smart Dimensions.
  3. Click anywhere on the spline to place the dimension and click. …
  4. Drag an endpoint of the spline.

How do you delete dangling dimensions in Solidworks?

  1. Open the master drawing in SOLIDWORKS. …
  2. From the SOLIDWORKS Menu select Tools>Options.
  3. Select the Document Properties tab.
  4. Select Detailing from the categories on the left.
  5. Locate the Hide dangling dimensions and annotations option and check the box next to it.

How do you delete a dimension in Solidworks?

To delete a SOLIDWORKS Sketch Dimension you typically select the dimension and hit Delete. To edit the value of the dimension you would double-click on the value to open the Modify dialog.

How do I delete part of a sketch in Solidworks?

To delete something, right-click on it in the design tree and select “delete.” If you choose the wrong plane: If you happen to select the wrong plane for the sketch, you have two solutions. One is to exit the sketch and delete it.

Article first time published on

How do you change a dimension from diameter to radius in SolidWorks?

  1. Right-click the dimension.
  2. In the Dimension PropertyManager, select the Leaders tab.
  3. Under Witness/Leader Display, select a placement option. For example: Radius. Diameter. You can also right click the dimension and select Display Options.

How do you Foreshorten a dimension in SolidWorks?

Right-click the side of the dimension to foreshorten and click Display Options > Foreshorten.

How do you stop a dimension from moving in Solidworks?

Go to Tools > Options > System Options > Drawings Uncheck Reduce spacing when dimensions are deleted or edited (add or change tolerances, text, etc.) If you prefer to leave that option checked, you can control the dimension spacing yourself.

How do I change dimensions in Draftsight?

  1. Type EditDimension at the command prompt.
  2. Specify an option: Angle. Rotates the Dimension text of existing Dimensions. Specify the rotation angle. …
  3. Select the Dimension to update.
  4. Press Enter. The specified Dimensions are updated.

How do you override dimensions in Draftsight?

  1. Click Dimension > Override (or type OverrideDimensionStyle).
  2. Type the name of a DimensionStyle variable to override.
  3. Enter the new value.
  4. Continue entering DimensionStyle variables and values, and press Enter when done.

How do I change units in SOLIDWORKS 2019?

  1. Click Simulation > Options. …
  2. Under Unit system, select SI (International System of Units), English (U.S. Customary Unit System), or Metric (gravitational system of units).
  3. Under Units, select the desired units for Length/Displacement, Temperature, Angular velocity, and Pressure/Stress.
  4. Click OK.

How do I change the dangling dimension in SOLIDWORKS?

Potential Fixes To set the color for dangling dimensions, click Tools > Options > System Options > Colors . Select Dimensions, Dangling in Color scheme settings. Click Edit, select a color, then click OK. Drag the dangling handle and reattach it to the correct sketch entity.

How do you change units?

  1. Write the conversion as a fraction (that equals one)
  2. Multiply it out (leaving all units in the answer)
  3. Cancel any units that are both top and bottom.

How do you change the units of dual dimension in Solidworks?

Dual dimensions Select to display dimensions in dual units. Select to display units for the second set of dimensions.

How do you delete a dimension in Creo?

1. Select the added dimension(s) you wish to permanently delete from the drawing. 2. Right-click and select Delete on the shortcut menu, or on the Annotate tab, in the Delete group, click Delete.

How do you delete a dimension in Inventor?

Delete Dimensions Select the dimension in the graphics window and press Delete, or right-click and choose Delete.

How do you delete annotations in Solidworks?

Select the annotation. Click the arrowhead handle. Press Delete.

How do you remove dangling dimensions?

Delete all dangling annotations with one click Click the Delete dangling annotations button to delete all dangling annotations on the current sheet. Click the Delete all dangling annotations button to delete old annotations on all sheets.

How do you hide dimensions in Solidworks?

  1. In your FeatureManager Tree, right-click on the Annotations folder and select Show Feature Dimensions. …
  2. To keep only a certain number of dimensions, those that aren’t needed can be hidden by right-clicking on the dimension in the design space and selecting Hide.

What are dangling dimensions?

Checks for dimensions or annotations that no longer have a reference.

How do I delete a segment in Solidworks?

  1. Open any sketch with segments or closed spline endpoints.
  2. Right-click the entity to detach and click Detach Segment on Drag . …
  3. Drag the endpoint to the desired location.
  4. Right-click the entity and clear Detach Segment on Drag.

How do you delete part of an object in Solidworks?

  1. Click the component in the graphics area or in the FeatureManager design tree.
  2. Press the Delete key, click Edit > Delete, or right-click and select Delete.
  3. Click Yes to confirm the deletion.

How do you change a smart dimension from diameter to radius?

When you’re sketching, if you smart-dimension a circle, it’s always in diameter and if you want to do it in radius, you have to change it in Dimension Properties>Leaders>Witnesses/Leader Display, and there, change it to radius.

How do you use smart dimension?

  1. Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart. …
  2. Select the items to dimension, as shown in the table below. You can undo previous selections by pressing Esc. …
  3. Click to place the dimension. To dimension the…

How do you create a radial dimension in Solidworks?

With a drawing open, click Options (Standard toolbar), select Document Properties, and then select Dimensions > Radius.

How do you dimension a circle in Solidworks?

  1. Click Smart Dimension. (Dimensions/Relations toolbar) or click Tools > Dimensions > Smart.
  2. Select the circle.
  3. Drag the dimension and click to place it.
  4. Set the value in the Modify box and click .

You Might Also Like