A control test is run using the same procedures as with a drop of blood. Insert a test strip into the meter and make sure your meter is set up and ready to use(see user manual). Shake well and gently invert the control solution bottle. Wipe the tip with tissue and discard the first two drops.
What is control solution used for AlphaTRAK?
AlphaTRAK® Control Solution is a red liquid that contains a certain amount of glucose designed to perform a control test for the AlphaTRAK® 2 Meter. The control solution is used for practice testing without having to use animal blood, as well as confirm that the meter and test strips are working properly.
How do you use the control solution to contour next?
- Step 1: Insert a new test strip into your meter and check that the meter is ready to perform a test.
- Step 2: Shake the control solution bottle vigorously.
- Step 3: Discard the first drop and wipe off the bottle tip so that it is clean.
How often should you use control solution for glucometer?
Use liquid control solutions every time you open a new container of test strips, and occasionally as you use them. You generally should also use liquid control solutions if you drop your blood glucose meter, or whenever you get unusual results.Do I need to use control solution?
In order to get the most accurate readings from your monitor, you should make sure that you use control solution. Its purpose is to make sure that your meter is working properly and calibrated correctly. By not using control solution you run the risk of getting blood sugar readings that are not right.
What is the difference between Level 1 and Level 2 control solution?
Control solution has two expiration dates, (1) is the closed bottle expiration date which is printed on the glucose control bottle label and (2) is 3 months from the date the control solution bottle was first opened – please refer to the control solution Instructions for Use for more information.
Is it necessary to date glucose control solution?
Do not use if expired. – Once opened, only use for the next three months. Record the discard date on the glucose control solution bottle. Discard after three months.
How do you test AlphaTRAK 2?
After obtaining a blood sample with the lancet, apply and hold blood to one sample area of the strip until the test is complete and results appear on the screen. Remove the test strip to turn meter off and discard the test strip. Only use these test strips with the AlphaTRAK® 2 meter. Do not reuse test strips.How accurate is AlphaTRAK?
Other- wise, 89% of the measurements in dogs and 92.9% of the measurements in cats using AlphaTrak®, and 69.7% of the measurements in dogs and 89.4% of the meas- urements in cats were plotted within the acceptable limits using AC® Performa.
How do you calibrate glucometer?To calibrate, you must use a fingerstick blood sample to test your blood glucose (BG) on your meter and then enter that value into your pump. The pump will accept BG meter readings between 40 mg/dL to 400 mg/dL.
Article first time published onWhat does it mean when AlphaTRAK says hi?
The result “HI” (High) will appear on the screen if the blood glucose reading is above 750 mg/dL (41.7 mmol/L). This indicates severe high blood glucose (hyperglycaemia).
Do AlphaTRAK test strips expire?
Do not use expired test strips; they may produce inaccurate results . IMPORTANT: Use only AlphaTRAK 2 test strips . Other test strips can produce inaccurate results . The test strips are for single use only .
Can a human glucose meter be used for a dog?
Can you use a human glucose meter for dogs? No, a human glucose meter should not be used for dogs. They will not provide an accurate reading for a dog because the way blood sugar is stored is quite different between humans and dogs.
Do you need control solution for glucose meter?
Manufacturers recommend that patients use control solution when they suspect a malfunction, and every time a new glucometer or a new pack of test strips is used. Control solution may also become more important as the FDA tightens criteria on glucometers, the researchers said.
How do you use Accu Chek Performa control solution?
First, wipe the tip of the control bottle. Then put the meter on a flat surface, insert the strip, and squeeze a drop of the control solution onto the front edge of the test strip. A result appears with a flashing “L”. Press one of the arrow keys once to indicate a Level 1 control test or twice to indicate Level 2.
What is a control solution for glucose meter?
Control solution is essentially “fake blood” that contains a known level of glucose. It is applied to a test strip just like a normal blood sample, and the resulting reading lets you know how well that test strip and your meter are working.
How do you use sugar monitoring?
Insert a test strip into your meter. Prick the side of your fingertip with the needle (lancet) provided with your test kit. Touch and hold the edge of the test strip to the drop of blood. The meter will display your blood sugar level on a screen after a few seconds.
What is a normal blood sugar level?
A blood sugar level less than 140 mg/dL (7.8 mmol/L) is normal. A reading of more than 200 mg/dL (11.1 mmol/L) after two hours indicates diabetes. A reading between 140 and 199 mg/dL (7.8 mmol/L and 11.0 mmol/L) indicates prediabetes.
What is the normal fasting sugar level?
Fasting Blood Sugar Test A fasting blood sugar level of 99 mg/dL or lower is normal, 100 to 125 mg/dL indicates you have prediabetes, and 126 mg/dL or higher indicates you have diabetes.
What is contour control solution used for?
The CONTOUR®NEXT control solutions are aqueous glucose solutions intended for use in self-testing by people with diabetes as a quality control check to verify that the CONTOUR NEXT EZ system is working properly.
How do you use Contour NEXT test strips?
- Insert the grey end of a CONTOUR™NEXT test strip into the meter. The meter will turn on.
- When the Apply Blood screen appears, touch the test strip to the drop of blood. Hold it there until the meter beeps. …
- Your test result will appear after a 5 second countdown.
What is the best glucose meter?
- Care Touch Blood Glucose Monitoring System. …
- FreeStyle Libre. …
- Dexcom G6. …
- Eversense. …
- Guardian Connect System. …
- Rite Aid TrueMetrix Meter. …
- Walgreens TrueMetrix Bluetooth Blood Glucose Meter.
What type of controls do you expect to use when measuring blood glucose?
Use a blood sugar meter (also called a glucometer) or a continuous glucose monitor (CGM) to check your blood sugar. A blood sugar meter measures the amount of sugar in a small sample of blood, usually from your fingertip. A CGM uses a sensor inserted under the skin to measure your blood sugar every few minutes.
When stored properly Accu Chek Inform II test strips?
Use the test strips at temperatures between 61–95 °F (16–35 °C). Use the test strips between 10–80 % relative humidity. Humidity is the amount of dampness in the air. Store the test strips at temperatures between 39–86 °F (4–30 °C).
How many months are control solutions stable for after opening?
The control solution is stable for 3 months after opening or until the Expiration date on the bottle label, whichever comes first.
How do you turn off Alpha Trak 2?
To save all your settings, press and hold down for three seconds until the meter turns off.
How often should I check my dogs blood sugar?
Monitoring of Blood Glucose: Determining the level of glucose in the blood is the most accurate means of monitoring. This should be done about every 1 to 3 months (based on what your veterinarian recommends) if your dog seems well regulated.
How can you tell if a dog is diabetic?
- Excessive water drinking and increased urination.
- Weight loss, even though there may be an increased appetite.
- Decreased appetite.
- Cloudy eyes (especially in dogs)
- Chronic or recurring infections (including skin infections and urinary infections)
