Place the saw on a wooden surface and pull back the blade guard. If the saw has an arbor lock button on the top of the housing, press it in. The arbor is the shaft the blade installs on. If there’s no lock button, press the blade into the wooden surface.
Where is the arbor lock on a circular saw?
Place the saw on a wooden surface and pull back the blade guard. If the saw has an arbor lock button on the top of the housing, press it in. The arbor is the shaft the blade installs on. If there’s no lock button, press the blade into the wooden surface.
Which way does a saw blade spin?
Like miter saws, table saw blades rotate clockwise, meaning the teeth should be pointing down.
How do you change the blade on a skilsaw table saw 3400?
- Turn elevation wheel clockwise until the blade is up as high as it. …
- Place open end arbor wrench 4 on flats on inside blade flange. …
- Assemble new blade, making certain the TEETH OF THE. …
- Assemble outer washer, arbor nut and securely tighten arbor.
What is spindle lock?
Most cordless drill drivers have a feature called spindle lock. When spindle lock is selected, the motor’s spindle is locked and so the chuck and screwdriver or drill bit cannot turn.
How do I change the blade on my Porter Cable miter saw?
- Disconnect the miter saw plug from the outlet.
- Press the spindle lock and loosen the bolt.
- Remove the miter saw blade.
- Install the new miter saw blade.
- Press the spindle lock and tighten the bolt.
How do you change the blade on a Black and Decker FireStorm saw?
- Grasp the side-mounted lever and pull up.
- Pull the current blade from the saw.
- Insert the new blade into the slot. …
- Lower the side lever.
- Pull vigorously on the blade to check the proper seating.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.Can you put a circular saw blade on backwards?
Yes – a circular saw blade can be accidentally mounted on the saw backwards – but it is a mistake you will only make one time because you will find out the instant you try to cut a piece of wood. It will not cut and you will be embarrassed at your mistake.
