How do you change the code on a Kwikset lock

Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 – 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.

How do I reset my Kwikset lock code?

1. Make sure the door is open and unlocked.
2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
3. Press and release the program button. You will hear one short beep.

How do I remove a code from Kwikset Smartcode 909?

Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.

Where is the program button on a Kwikset lock?

For most Kwikset smart locks, the program button is on the inside of the interior assembly. You may need to remove the interior cover to access the program button.

How do you change the code on a Kwikset Halo?

1. Open the Kwikset app.
2. Tap the Menu icon.
3. Select Account Settings.
4. Select Account.
5. Select Change Password.
6. You will be prompted to enter your old password, then the New Password fields must be filled out.

How do I change the code on my Kwikset SmartCode 909?

To set a code for the second user, press the SmartCode “Program” button twice to program a security code for the second user, such as a relative. Enter a four to eight digit security code on the outside electronic lock keypad and press the “Lock” button again.

How do you change the code on a Kwikset 916?

1. Make sure the door is open. Press the Program button once.
2. Press checkmark symbol once.
3. Enter user code. A total of 16 user codes may be programmed. Each user code must be a unique code between 4 and 8 digits.
4. Press lock symbol once.

How do I change the code on my Kwikset 264?

1. Enter your Programming Code.
2. Press “”Kwikset”” then “”1″” then “”Kwikset””
3. Enter a new User Code. It must be between 4 and 10 digits.
4. Press “”Kwikset””
5. Test the code: While your door is open, lock it and enter your new User Code to make sure it unlocks the door.

How do I delete all codes on Kwikset SmartCode 910?

1. Keep door open. Press the Program button once. …
2. Press Lock button once.
3. Enter Mastercode.
4. Press Lock button once.
5. Press “9” six times.
6. Press Lock button once.
7. Press “9” six times.
8. Press Lock button once.

How do you change the code on a Kwikset lock 913?

1. Open the door.
2. Remove battery cover.
3. Press the program button once.
4. Enter new user code.
5. Press lock button.
6. If programming is successful the keypad will flash green once, and you will hear one beep. Connect with us. Monday-Friday: 7:00am-4:00pm PST. Saturday: 6:30am-2:30pm PST.

Article first time published on

How do you change the code on a Kwikset 910?

Press and HOLD Program button until keypad flashes green (about 5 seconds). Enter new mastercode. Press Lock button once. Re-enter mastercode.