How do you flatten sheet metal in Solidworks

In the FeatureManager design tree, select the part and click Flatten (Sheet Metal toolbar).In the cut list, right-click the body and click Flatten .In either the FeatureManager design tree or the cut list, right-click the Flat-Pattern feature for the part and click Unsuppress .

How do you flatten sheetmetal?

1. To flatten the entire part, if the Flat-Pattern1 feature is present, unsuppress Flat-Pattern1, or click Flatten. …
2. To flatten the entire part, if the Process-Bends1 feature is present, suppress Process-Bends1, or click Flatten. …
3. To flatten one or more individual bends, add an Unfold.

How do I flatten a part in Solidworks 2021?

1. In an open part, click Flatten (Surfaces toolbar) or Insert > Surface > Flatten. …
2. Select faces in the graphics area or from the FeatureManager design tree.
3. Then select a vertex. …
4. In the PropertyManager, click Relief Cuts.

How do I flatten in Solidworks?

1. In an open part, click Flatten (Surfaces toolbar) or Insert > Surface > Flatten. …
2. Select faces in the graphics area or from the FeatureManager design tree.
3. Then select a vertex. …
4. In the PropertyManager, click Relief Cuts.

How do I flatten bends in Solidworks?

1. To flatten the entire part, if the Flat-Pattern1 feature is present, unsuppress Flat-Pattern1, or click Flatten. …
2. To flatten the entire part, if the Process-Bends1 feature is present, suppress Process-Bends1, or click Flatten. …
3. To flatten one or more individual bends, add an Unfold.

How do you flatten tubing?

For Tube Flattening, the punch press operation is a cost-effective way to produce a flat tube end for tubular assemblies. Using a dedicated die set, this process combines three separate operations, flattening the end of the tube, trimming the end corners, and piercing a hole pattern for fastening the tube.

Why is surface flatten greyed out?

The reason for the “Flatten” icon being greyed out was because the sheet metal part had a “Flat Pattern” annotation view and this annotation view was active. By selecting another annotation view, the “Flatten” icon then becomes available again.

How do you format a sheet in Solidworks?

1. File > Open and change your file type option to Template. …
2. Change the drawing sheet size if necessary.
3. Change the sheet format to the desired sheet format file.
4. Change any options needed within the Document Properties.

What is flatten surface?

A developable surface is a surface that can be flattened onto a plane without distortion. Non-developable surfaces and faces deform when flattened. You can select curves and sketches on the surface to flatten. You can also select curves, sketches, and edges on the surface to be relief cuts or split lines.

How do you turn on sheet metal in Solidworks?

1. Right click on the tabs in the CommandManager.
2. Select Sheet Metal from the list.

Article first time published on

How do you make sheet metal in Solidworks?

1. Open the sheet metal part for which you want to add a drawing.
2. Click Make Drawing from Part/Assembly (Standard toolbar), and click OK to open the drawing sheet.
3. Select a format or click OK to use the default format.
4. From the View Palette, drag the Flat pattern to the drawing sheet.