Firmly grab the handle of the heavy-duty stapler. … Pull out the remaining good staple clip and set it aside.Grab the jammed staple with the needle-nosed pliers and pull it out.Insert the solid clip of staples back into the head of the stapler.
How do you unjam a Swingline heavy duty stapler?
- Firmly grab the handle of the heavy-duty stapler. …
- Pull out the remaining good staple clip and set it aside.
- Grab the jammed staple with the needle-nosed pliers and pull it out.
- Insert the solid clip of staples back into the head of the stapler.
Why is my Swingline stapler not working?
A manual Swingline stapler that jams on a regular basis is most likely using the wrong staples. Take out any staples that are jammed into the Swingline stapler by twisting them as you pull with a pair of needle nose pliers. … Review the instructions to be sure you are properly operating the stapler.
How do you unfold a stapler?
Open the stapler. To open these, grip the base of the stapler, then pull the top of the stapler until it lifts open and the staple tray is revealed. Back load staplers usually have a button on the back, so to open these, push the button until the stapler tray pops out slightly.How do you open a hand stapler?
Find the magazine release buttons at the back of the stapler. The magazine release is a button that releases clip that holds the staples in place. Look at the rear part of the stapler, toward the bottom. It should have 2 small indentations on either side of the stapler for you to squeeze and pull.
Why is my stapler stapling backwards?
The setting most people use is the one that causes the legs of the staple to bend inward to hold a stack of papers firmly together. This is the “staple” or “reflexive” setting. If the user reverses the strike plate, the staple’s legs will splay outwards when they come through the paper. This is the “pinning” setting.
Why is my stapler not working?
It’s possible that you’re using poor-quality staples that crumple easily, or that the paper you’re using is too thick for the stapler. Make sure you’re using staples with an appropriate strength rating for your staple and that you’re not trying to staple through too many pieces of paper at once.
