How do you program a URC One For All remote

PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.ENTER the 3 digit code for your brand.You should receive 2 quick flashes after entering your code.

What are the codes for a One For All universal remote?

ADC – 0002 0006.
ADMIRAL – 0020 0226 0001.
ADVENT – 0176 0922.
ADVENTURA – 0174.
AIKO – 0058.
AIWA – 0195 0196 0227 0269.
AMTRON – 0053.
AKAI – 0105 0002 0077 0254.

Why won't my one for all remote work?

Reinsert the battery – the LED should blink twice. Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice. Enter the code 9 8 1, the LED will blink 4 times. The remote is now reset to its factory defaults.

What is the magic key on One For All remote?

Magic Key The MAGIC key is used to set up your ONE FOR ALL 5. Power The POWER key operates the same function it did on your original remote control. VCR you can operate your Video Cassette Recorder etc.

How do I reset my One For All remote?

If you wish to return the remote to the default settings, you can perform the following:
Hold down the TV Power and Back keys until the ring blinks twice in yellow.
Press OPTIONS, REPLAY and HOME consecutively.
The ring will blink red 4 times and the remote is now reset.

How do you find your 4 digit code on your TV?

Check the User’s Manual of your remote control to locate the code section. The list of codes for the remotes on the manual differs. Some of the codes are on the manual, while some are written on a piece of paper that comes with the manual. Locate the code and try it out to find the one that matches your Tv remote.

Where can I find my URC code?

On the remote control, press TV once.
Press and hold SET until the LED (red light) blinks twice, then release SET.
Enter 9 9 0. …
To view the code for the first digit, press 1 once. …
Repeat step 4 three more times for remaining digits.

How do I reset my URC remote?

Hold the RED + BLUE keys down until the LED blinks once and then twice.
Enter code 981, the LED will blink four times.
You can now setup your remote again.

Do One For All remotes work on smart tvs?

Remote controls Smart, reliable and fully compatible, ideal for operating all your home entertainment devices.

How can I reset my One For All URC 7140?

Hold down Magic until the LED stays on.
Enter the code 992, the light will blink twice.
Using MODE, select the Device you wish to reset.
Press MAGIC twice.
The device key has now been deactivated.

Article first time published on

What is the URC code?

S.NoName of StationNominated URCs118Port BlairURC, HQ AFC (URC Code 518) Port Blair119KolkataURC, Fort WilliamURC, INS Netaji SubhashURC, HQ Bengal Sub Area

How do I tune my one for all remote?

The process is as simple as pointing the original remote towards the One For All remote, selecting a key on the One For All remote and pressing the key on the original. Repeat for each key you want to learn and from then on the One For All will do exactly what your original remote does!

Do all universal remotes work on all TVs?

Can universal remotes work on all TVs? Most of the time, yes, a universal remote should work on any television. But it’ll depend on the make and model of your remote and your TV. On the whole, your universal remote should work with all TVs made in the past ten years or so.

Is One For All a universal remote?

One For All is the worldwide leader and inventor of universal remote controls to suit any lifestyle.

How do I reset my Huayu remote?

Press and hold the “SET“ button. Then press the ”Power” button simultaneously and hold them down for 3 seconds, The LED will begin flashing indicating the remote is in Auto Search mode. If the LED is not flashing, wait until the LED turns off and then re-press both the “SET” and “Power” buttons again.

How do I program my universal remote to my Haier TV?

Turn on the TV.
Press and hold the TV and SEL buttons simultaneously for 3 seconds. …
With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
Verify by pressing the VOLUME + button. …
Press the TV button to store the 3, 4, or 5 digit code.

Why is my TV not responding to the remote?

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

How do I control my Smart TV with my phone?

On your Android phone, open the Google TV app .
Near the bottom right, tap Remote .
At the top, tap Scanning for devices.
Choose your device.
To complete pairing, follow the instructions on your phone and TV.
After pairing, you can use your phone or your remote.

What is a Vizio Smart TV?

VIZIO Smart TVs let you stream all your favorite shows, movies, music and more.

Can you use any universal remote on a smart TV?

Do universal remotes work with smart TVs? As long as your smart TV has an IR sensor (or whatever connection type your remote uses, like Bluetooth or Wi-Fi), your universal remote should work with it. But some universal remotes will control only your TV’s power, volume, and channel up/down buttons.