Turn on the stop valve.Run out the length of the hose as required.Turn on the water at the nozzle, direct the stream at base of fire.Ensure you leave a direct egress path between you and the nearest exit door/ egress route.
What is the correct process for using a fire hose reel effectively?
- Call 000.
- Alert others.
- DO NOT use on electrical fires!
- Ensure the fire hose reel, is turned on before heading to the fire.
- Check the water is available at the nozzle. …
- Pull on the hose, the reel should unwind as it feeds out the hose.
Is a fire hose reels always charged with water?
Because fire hose reels use water to extinguish a fire they are only suitable for Class A fires which are ordinary combustibles such as a paper or wood. Operators should never use a fire hose reel on electrical fires as water conducts electricity and make the fire worse.
When would you use a fire hose reel?
Ideal for fighting a fire in its early stages, fire hose reels are most suitable for Class A Fires, commonly caused by normal combustibles like paper, textiles, wood, most plastics and rubber. Some common examples of class A Fires include the ignition of recycling bins, carpeting or furniture due to candles or embers.What is the fire hose reel?
Fire hose reels are located to provide a reasonably accessible and controlled supply of water to combat a potential fire risk. … Hose reels can come in lengths of 30m of 19mm and 25mm hose. Hose Reels are available in fixed, swinging, recessed and concealed versions with automatic or manual valves.
How often do fire hose reels need to be inspected?
Fire Hose Reels need to be tested every 6 months and certified every 12 months. They are tested in accordance with AS1851. Fire Hose Reels should not be used for any other jobs other than fighting fires. Sydney Extinguishers is always seeing the use of fire hose reels for washing cars and down driveways.
What is the maximum distance between fire hose reels?
When used in a Class II system, fire hose reels with 1 1/2” hose may be placed as far as 130 feet apart from each other (as measured with the “actual length” method).
What do hose reels provide?
Fire hose reels are used to provide a controlled supply of water to combat any potential fire risk involving combustible solids (Class A) and require connection to a pressurised source of water either from the mains supply or a storage tank.What must not be done when using hose reel?
Hose Reels are suitable for Class A fires: Paper, Textiles, Wood, Most Plastics and Rubber. Do NOT use on electrical fires, remember water conducts electricity, so using a fire hose reel on it could lead to electrocution!
Why should you not run with the hose reel?Remember water conducts electricity, so using a fire hose reel on it could lead to electrocution! Fire Hose Reels are easy to use, provide a virtually unlimited supply of water, as they are connected to the mains water supply, and should extend for approximately 35 metres.
Article first time published onHow do you unroll a fire hose reel?
- Step 1: Pick Up Hose. …
- Step 2: Grab Hose Male Coupler Facing Forward. …
- Step 3: Two Fingers Under First Lay of Coupler. …
- Step 4: In a Swinging Motion With Hose (ring Finger and Little Finger Holding Second Lay. …
- Step 5: Swing in a Bowling Motion.
Why are fire hose reels connected to mains water?
An Unlimited Supply of Water The control nozzle attached to the end of the hose enables the operator to control the direction and flow of water to the fire. The fire hose reels are connected to the mains water supply and can therefore provide an unlimited supply of water.
What element do fire hose reels remove?
They work by cutting off the oxygen supply (oxygen is one of the three elements that a fire needs to burn) and smothering the fire.
What is the length of fire hose reel?
Fire Hose Reel pipe, Diameter: 65mm, Reel Length: 30 m.
Where should fire hose reels be placed?
- Fire hose reels must be located within 4m of an exit. …
- Generally, separate hose reels are to be provided for each storey of the building. …
- A fire hose reel should not be located such that it is required to take the hose through a fire or smoke door to fight a fire.
Where should hose reels generally be located?
Hose reels must be installed within 4m of an exit door protected in a double door hose box. Sometimes it is impossible to give the system coverage with fire hose reels fitted near exits, in such cases, it is permitted to install extra hose reels “in the way of exit”.
Where should I put my hose reel?
- Over a Water Spout. One of the most popular places to position a hose reel is directly over a water spout. …
- Next to a Water Spout. Another place that you can locate your hose reel is next to a water spout. …
- On the Ground. …
- In Your Garage.
How do you test a fire hose reel?
Fire hose reels require regular visual examination by a competent person. Also an annual flow rate test and a pressure test are required. The fire hose must be pressure tested every five years. The test details should be recorded on a service label attached to the reel.
Is it illegal to use a fire hose in NSW?
USE OF FIRE HOSE REELS It is illegal to take water from a fire fighting hydrant or fire hose reel, unless it is taken for fire fighting purposes. This applies to both public and privately owned fire hose hydrant/ reels. Ensure that fire hoses are not used for wash down.
What does acronym race mean?
R.A.C.E: An acronym that hospital personnel use to remember their duties in case of fire. It stands for RESCUE, ALARM, CONFINE, EXTINGUISH/EVACUATE. P.A.S.S: An acronym that hospital personnel use to remember their duties for discharging a fire extinguisher.
What fires would you not use a water extinguisher or hose reel for?
Both the Water Extinguisher & the Hose Reel are suitable for A Class fires only. These are fires involving wood, paper, textiles, carpet, cardboard etc, (solid object fires). They must not be used on live electrical or electronic fires.
What are the four things that make up the fire tetrahedron?
The four elements are oxygen for sustaining combustion, enough heat for raising the material to the ignition temperature, combustible material or fuel, and a subsequent exothermic chain reaction in the material. All the four sides of the fire tetrahedron symbolise the Heat, Oxygen, Fuel, and Chemical Chain Reaction.
When all 3 elements of fire triangle combine what can occur?
Combustion can take place when 3 factors or elements are present: Fuel, Heat and Oxygen.
How do you stop a combustion fire extinguished?
Extinguishment of the fire To stop a combustion reaction, one of the three elements of the fire triangle must be removed. Without sufficient heat, a fire cannot begin, and it cannot continue. Heat can be removed by the application of a substance which reduces the amount of heat available to the fire reaction.
