How do you winterize a Yamaha outboard motor

Change oil & filter.Fog the engine.Grease fittings.Change fuel filter.Add fuel stabilizer.Wash & dry.

How do I winterize my Yamaha outboard?

Change oil & filter.
Fog the engine.
Grease fittings.
Change fuel filter.
Add fuel stabilizer.
Wash & dry.

How do you winterize a Yamaha WaveRunner?

To winterize a WaveRunner, you’ll need fuel stabilizer, RV antifreeze, and a lubricant spray. Fill up the gas tank and add the right amount of stabilizer to the fuel. Then you have to flush the cooling system with antifreeze, and lubricate the moving and metal parts.

Do you need to fog a 4 stroke Yamaha outboard?

4 strokes do not need “fogging” because pretty much all the moving parts are already coated with crankcase oil.

Can you leave an outboard motor in the water during winter?

You can leave the boat in the water all summer. But there is always a risk involved in storing the boat in the water than dry storing. However, by taking appropriate measures like bottom paint, barrier coat, tilting the outboard up out of the water, etc., you are less likely to cause damage.

How do you winterize a 4 stroke outboard motor?

Drain the crankcase oil (Four-stroke motors)
Install a new oil filter (Four-stroke motors)
Filling the crankcase with new oil (Four-stroke motors)
Changing the lower unit gear oil.
Stabilizing the fuel.
Flushing the outboard with antifreeze.
Fogging the cylinders.

Are Yamaha outboards self draining?

Don’t Start the Motor Out of the Water All outboards have a self-draining cooling system. There is no reason to start the motor with the notion that you are going to purge the last drops from the water pump housing.

What position should outboard motors be stored?

The best way is to either leave the motor on the boat or on an engine stand in an upright position, not tilted. If neither of these are an option, try to make sure that the engine is in an upright, self-draining position. If you can’t do this, be sure that the cooling system is drained completely.

Can you use WD40 as fogging oil?

Yes. WD40 is a water displacer, not a very good lubricant, and a bit of a solvent. If you need to spray anything int he cyclinder, it should be a penetrant like PB Blaster or even some oil. I’ve used ATF to free stuck rings.

Do you really need to winterize an outboard motor?

If you want your engine to start in the spring and last you many years and plan on not using your engine all winter, you do have to winterize an outboard motor. Winterizing the engine helps to prevent damage during disuse, which is the chief cause for engine failure. Failing to winterize may lead to complications.

Article first time published on

Do you have to winterize a Yamaha jet boat?

Winterization of Yamaha Jetboats. If you live in an area where you can’t use your boat year-round, you may need to winterize it. If you have a lay-up period of perhaps 3 months or less, you probably don’t need to worry about fuel treatment or fogging oil.

Should you leave your outboard up or down?

You want to leave the engine in the totally trimmed down position. This will allow all of the water to leak out of the engine, midsection, and lower unit. … Making sure that there is not any water in the Lower Unit that could rust gears or freeze and destroy the gear case by flushing the engine with fresh water.

How cold is too cold for an outboard motor?

How cold does it have to get to crack a boat engine block? Temperatures of 25 degrees Fahrenheit (-3 degrees Celsius) can result in a boat engine block cracking if left unprotected.

At what temperature will a boat motor freeze?

Unwinterized boat engines can freeze any time the air temperature is below 28°F (-2°C) – for an extended period. Freshwater cooled engines without proper coolant can freeze below 32°F (0°C). The good news is you can prevent freeze damage fairly easily.

How long can you run a boat motor on muffs?

Don’t run the engine unattended. Keep an eye on the muffs and make sure they don’t slip off of the water intakes. Regardless of your task, it’s unlikely that you’ll need to run it more than 10 to 15 minutes.

Is it bad to run an outboard engine at full throttle?

Does this mean an engine should never run at wide-open throttle (WOT)? Absolutely not. Modern engines are designed to handle WOT. Also, during break-in going to WOT, as prescribed by the owner’s manual, is necessary to properly seat the pistons’ rings.

How do you winterize a Yamaha 2 stroke outboard?

Add fuel stabilizer to your outboard’s fuel system.
Run your outboard for a few minutes so the engine draws stabilized fuel into the fuel lines and the fuel system. …
As the engine begins to splutter, spray fogging oil directly into the carburetor’s throat.

Should you leave your boat motor in the water?

It’s best to tilt your outboard up when leaving your boat in the water to prevent marine growth from forming and from corrosion eating away at its metal parts. That being said, there are some instances when you may prefer tilting your outboard down.

Do I need to winterize my boat if I keep it in the garage?

Of course, as BOATUS states, the best winter storage space for your boat is “indoors, in a climate‑controlled facility with a backup generator.” This means that you need control over the temperature in your garage. A good garage door that seals out the cold will help keep your boat safe over the winter.

What happens if you don't winterize your outboard motor?

If You Don’t Winterize Your Boat, Here’s What Happens: Water freezes and expands and can damage anything it’s trapped inside. Water may seep into unprotected spaces to do this. Acidic and corrosive wastes, salt and corrosion buildup can damage delicate parts in engines. Fuels break down or grow dirty.

Do you have to winterize 4 stroke outboard?

Like inboards and sterndrives, outboard engines are also subject to potential damage from freezing and from being laid up in disuse for months at a time. So outboards demand winterizing too. … To serve as our example, we used a Yamaha F150 four-cylinder outboard.

Can you put oil in spark plug hole?

Remove all of the spark plugs, and using a squirt can, shoot about a tablespoon of engine oil into each spark plug hole. Once this is completed, gently rotate the engine BY HAND a few times to help re-coat the cylinder walls with oil and to make sure it actually turns over and doesn’t have any other issues.

Is fogging an engine necessary?

Fogging a boat engine is an essential part of the winterizing process. If you’re putting your boat into long-term storage, fogging the outboard motor is vital. … Fogging oil is a waxy oil that you spray into your engine to essentially coat its components and protect them from corrosion while it’s sitting.

What do you spray in spark plug holes?

You can spray WD40 into any hole, as to the effect well that depends on the hole! Now in the case of a spark plug hole it used to be done to get a newly rebuilt engine to fire up as the spray consists of a propellant and the oil itself, which will both burn.