What does f5 and e2 mean on a washing machine

The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.

How do I fix F5 error on washing machine?

Try resetting the washer by unplugging it for 10 minutes. This may clear the code and end the problem, especially if you got all the obstructions out of the lid lock mechanism. You can also press and hold the end of cycle button for 20 seconds and that should reset the washer and clear the codes.

How do I fix E2 error on my Whirlpool washer?

Whirlpool error F05 or E2 This means there’s something wrong with the water temperature sensor. Time to reset the Whirlpool. Switch off the washing machine and remove the connector for 30 minutes. Afterwards, plug the washing machine back in and start it up again.

How do I fix the F5 on my Whirlpool washer?

Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.

What does F5 mean on a washing machine?

Did you receive a F5 E2 lid lock alert? The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area.

How do I fix error F5 E2?

The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.

Why does my washing machine say E2 error?

The E2 error in Samsung washing machines informs the user about water draining problems. For some reasons, the device can’t drain the waste of water. … So waiting time for draining is exceeded.

What does F5 mean on Whirlpool washer?

The “F5” error means that the temperature sensor has recorded an unusual reading while using hot water. This usually is a sensor error rather than a malfunction of your hot water heater.

What is F5 error code?

An F5 error code indicates that the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time. This occurs when either the controller on the board or the fan malfunctions.

What does e1 F5 mean on a Whirlpool washer?

The Whirlpool washer F5E1 error code is a door switch error. When the door switch is open while the door is locked for longer than 5 seconds the main control will shut the machine off and report this error. … Check for loose connections on the wiring from the door lock switch assembly to the ACU ( main control board).

Article first time published on

What does F5 mean on Whirlpool?

The F5 on most Whirlpool ranges will indicate that you have a problem with the oven door latch assembly or the oven door switch. Since you are seeing this error code when you are trying to set the self cleaning mode, this is likely the problem with your range. You could have a problem with the door switch.

How do I clear the error code on my Whirlpool washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

How do I fix the error E2 on my Haier washing machine?

Haier error E2 An E2 error on a Haier washing machine indicates a malfunction with the door. First, check if the door is properly closed. Make sure that there’s no laundry stuck between the washing machine and the door. If the washing machine is completely full, the drum may be overloaded.

What does F5 mean on Kenmore washer?

The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range. The F5 error is normally caused by a failed NTC temperature sensor.

What does E2 mean on Bosch washing machine?

Bosch Nexxt 500 series washer displays the E02 error code. It signals about problems with the electric motor of the device. In this case, the drum does not rotate when the washing program is run, or the program does not start at all.

How do I fix F05 fault Indesit?

1. Prepare a towel or a bucket.
2. On the front side of the machine, open the hatch in front of the drain filter and unscrew the filter.
3. Drain the excess water and collect it.
4. Check if there’s a pin, coin or button in the drain and remove it.
5. Clean and replace the drain filter.

What does UC mean in Samsung washing machine?

Error CodeCauseUCExcessuve Fluctuation In The Supply Voltage (voltage has fluctuated outside 176-286vAC)UE, E4Unbalanced Error (the washing load in the drum is unbalanced i.e. clothes may have got trapped inside a large towel and resting on one side of the drum)

How do you manually drain a washing machine?

1. Step 1: Turn off the power and lay down towels.
2. Step 2: Locate the drain hose at the back of the washing machine.
3. Step 3: Drain the water.
4. Step 1: Turn off the power and lay down towels.
5. Step 2: Locate the drain hose.
6. Step 3: Drain the water.
7. Step 4: Scrub the filter.

How do I fix the f5 code on my Maytag washer?

1. Power unit down by turning off the circuit breaker or unplugging for one (1) minute.
2. Power unit up by reconnecting power.
3. Open and close the door.
4. Restart a new cycle.
5. Monitor the washer for one (1) minute to ensure the error code does not display again.

How do I fix f5 on my Kenmore washer?

The only way to clear the codes is to unplug and let sit, and then plug back in. Then it is good to go again. Various comments online indicate correlation to Water Temperature Sensor or Water Heating element.

What does FS mean on a washer?

The ‘FS’ error code indicates a freezer sensor error. This error will require service.

What does E2 mean on Whirlpool dryer?

The Whirlpool Duet Dryer Error E2 means the control has detected that the thermistor is shorted. This error can be a wiring issue from the control to the thermistor or a bad thermistor. In some cases it can be a bad control reporting false errors but this is not common.

What does F5 E2 mean on Whirlpool oven?

Generally speaking the “E2-F5” fault code indicates a door latch failure or a door latch switch failure. … Measure latch switch (unlatch = switch open. NOTE: Oven light contacts are closed). 5. If corrections are made in any step, reconnect control to verify correction.

What does F5 E1 mean?

Door Lock Issue The F5E1 Error Code indicates that there may be an issue with the door switch/door lock. The door is unlocked during a cycle when it should be locked. Try resetting the washer/dryer by unplugging it from the outlet for at least 1 minute, and then plugging it back in.

What does E1 F5 mean on Whirlpool?

The “E1 F5” error code is a door switch malfunction. This may display if the door is not shut properly, if it is jammed or if the spring-loaded mechanism has broken.

How do I fix E1 error on my Whirlpool washer?

1. Check that the water faucets are not closed.
2. Check that the water pressure in the house is over 20 kPa.
3. Clean the inlet hose filter screens. Be careful not to remove or disturb the screen placement.
4. Check that the drain hose is not below 27½” (700 mm) from the floor.

How do I reset my Whirlpool Cabrio washer?

Press the Start Stop button once. Rotate the dial until Rinse, Wash, and Stop light illuminate. Turn the washer off and unplug it for 10 seconds. Finally, turn on the washer and it should now be reset.

What does rL mean on Whirlpool washer?

The “rL” error code means that a load has been detected in drum during Clean Washer with affresh® cycle. The Clean Washer cycle is meant to run empty, with no clothing inside the washer. Remove items from washer drum and restart Clean Washer with affresh® cycle.

What does F mean on Whirlpool washer?

The single F error without additional letters, signs, or numbers indicates the failure of the control board. It cannot send messages to other units and systems. This error is caused by voltage drops in the home network, severe voltage surges, and short circuits.

What does the Code F mean on a Whirlpool washer?

The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won’t run at all.

How do I fix error code 1E?

Disconnect the strainer, clean and rinse it, as it may become clogged. Check the condition of the hose. It is possible that it is pinched, clogged, bent or twisted. Unplug the washing machine: unplug the cord and plug it into the power outlet after 5-10 minutes to reset error code 1E.