Place the saw on a wooden surface and pull back the blade guard. If the saw has an arbor lock button on the top of the housing, press it in. The arbor is the shaft the blade installs on. If there’s no lock button, press the blade into the wooden surface.
How do you change the blade on a Skil hand saw?
- Turn the Skilsaw off. …
- Press the red button to lock the blade. …
- Lift the safety guard. …
- Use a 3/4″ wrench to remove the retaining bolt from the center of the blade on your Skilsaw. …
- Place the new blade on the Skilsaw. …
- Replace the retaining bolt to lock the new blade into position.
Why is my circular saw getting stuck?
Here are some reasons your circular saw keeps stopping: Damaged, warped, loose or dull blade. Motor malfunctioning or overheating. Cable problems like frayed cord or weak connection. … Check to make sure your blade depth is deep enough to cut through the wood.
How do you change the blade on a skilsaw 5400?
- Turn BLADE STUD with wrench provided. counter-clockwise and remove BLADE STUD. …
- Retract the lower guard all the way up into. the upper guard. …
- Make sure the saw teeth and arrow on the. …
- Slide blade through slot in the foot and. …
- Reinstall OUTER WASHER and tighten.
Which way does the blade face on a jigsaw?
Finally, familiarize yourself with teeth direction: A standard jigsaw blade has teeth pointing upward to cut on the blade’s upstroke—it’s the best choice for all-purpose cutting.
