Where is the cistern on a back to wall toilet

What is a Concealed Cistern? With a usual toilet, the cistern is positioned at the rear of the toilet bowl. It may be where you position your spare toilet paper, or perhaps a bowl of Potpourri to keep everything smelling fresh.

Do back to wall toilets come with a cistern?

With a close coupled toilet, the pan and cistern all come as one complete unit. A back to wall toilet (as the name might suggest) can sit flush against a wall or unit, whereas there is usually (but not always) a gap between a close coupled toilet and any wall.

What cistern do I need for back to wall toilet?

If purchasing a back to wall toilet only (without a unit), then you will need a specially designed concealed cistern to complete the installation. These usually include the chrome flush button. Make sure the cistern has a dual flush to help save water.

Where is the water inlet on a back to wall toilet?

A back/top inlet is located inside the cistern out of sight and a bottom inlet is positioned beside the toilet pan with the valve and hose in view. If you’re replacing a toilet, be sure to check the water inlet position and trap set-out of your chosen toilet to make sure they’re a match.

Are back to wall toilets good?

A back to wall or wall hung toilet may be more pleasing to the eye, it may even save space in your bathroom, but they are often the more expensive option. … In terms of water efficiency, wall hung toilets can offer reduced water storage or dual flush features, meaning that you only use the water needed.

How do you open a concealed toilet cistern?

Locate the toilet cistern’s push button.
Slightly lift the cover plate and remove it. …
Carefully remove the flushing rods located at the centre of the concealed cistern frame. …
Unfasten any plastic bolts manually to release the frame.

What is a back inlet toilet?

A back inlet toilet is where the inlet location is at the top of the cistern and a bottom inlet toilet is where the inlet location is at the bottom of the toilet.

How do you turn off the water to the back wall of a toilet?

To turn off the water supply to a toilet, simply close the toilet’s shutoff valve, which looks like a football-shaped valve located beneath the tank. Turn the valve clockwise until it can’t turn anymore, then flush your toilet.

What is a toilet cistern?

A cistern; is a receptacle built to store water. … In a toilet, the upper part is the cistern which is a small tank that is used to store water for flushing. In toilets, cisterns also hold the right amount of water to enable flushing of the toilet bowl.

Are toilet cisterns a standard size?

Considered the standard type of cistern till very recently, low level cisterns are sited just above and behind the WC pan. … Dimensions: Low level cisterns are on average 455mm wide, 350mm high, and project 230mm from the wall. Larger and smaller sizes are also available.

Article first time published on

What size cistern do I need?

A minimum storage capacity of 5000 gallons is recommended for domestic cisterns. This capacity should eliminate having to buy or haul water, a practice that is not only inconvenient but can become somewhat costly.

What is a BTW toilet pan?

One way to solve it is to get a back to wall toilet. … Without compromising the rest of your suite, a back to wall toilet unit helps towards expressing minimalism in your bathroom by maximising space. It does this by concealing the cistern behind the pan by hiding it away in a unit or behind a wall.

What is ledge wall?

The ledge is a projection from a wall. It usually serves the function of a shed to deflect rain from walls and windows. Many a time, they are designed to enhance the aesthetic view to the building.

What is in a cistern?

A cistern (Middle English cisterne, from Latin cisterna, from cista, “box”, from Greek κίστη kistē, “basket”) is a waterproof receptacle for holding liquids, usually water. Cisterns are often built to catch and store rainwater.

How can I hide my toilet waste pipe?

If you don’t want to go to the house of boxing in your pipes or building fake walls, then a much simpler (and cheaper) way of hiding the pipework in your bathroom is to use decorations. Decorations can be as simple as winding some fake flowers or ribbons around the pipes or using rope to obscure them.

Should a toilet have ap trap?

But never install a p-trap for a toilet! Because toilet’s have internal traps. Double trapping a plumbing fixture in series is a code violation. The second trap causes unnecessary obstructions in the flow of drainage.

Where is the P-trap on a toilet?

A toilet trap, or trapway, is a curving channel inside the base of a toilet that leads from the hole at the bottom of the bowl to the drainpipe. When a toilet backs up and the clog did not occur in the drainpipe, the stoppage usually exists in the trap.

Do you screw a cistern to a wall?

Picture of w/c would be good,if a budget w/c always the possibility of holes missing however a lot of the smaller style cisterns do not need screwing to the wall and thus do not have holes for securing,they just sit bolted to the pan,that should be secured to the floor securely,you can stick a bead of silicon alone the …

Can I drill a hole in a toilet cistern?

Drill smooth holes through ceramic toilets. … It’s essentially the same as drilling through ceramic tiles, but the thickness can vary on toilets. The thicker it is, the hotter a drill bit can get, so this is a job that depends on a couple of things — the right tools and the right techniques.

What is concealed cistern?

What is a Concealed Cistern? With a usual toilet, the cistern is positioned at the rear of the toilet bowl. … Now, a concealed cistern is a cistern hidden behind the wall of your bathroom, which enables the toilet pan to sit flush against the wall.

How do you open a toilet paper dispenser without a key?

Paper Clip. This method requires you to get a metal paper clip. …
Screwdriver. The screwdriver will come in handy if your dispenser is fixed with screws to the toilet paper holder. …
Using Nail. …
Copy Key.

Can you replace toilet cistern?

However, you don’t always have to change the entire thing – you can always replace parts of a toilet in stages. This may be to save costs or you may have come across an issue. If that’s the case, outside of a flusher or seat, your cistern will often be replaced.

How much does it cost to replace a toilet cistern?

It costs around $100 to $400 to replace the entire toilet and will cost nearly as much to replace just the cistern. However, there are some exceptions. If you have a standard model, the toilet cistern price can be almost the same cost as a new toilet at around $50 to $100 without labour.

How do I know what cistern I have?

Look for the manufacturer name or a number on the bottom side of the water tank lid. It may be stamped into the lid or painted on – some of them may even be handwritten if the tank lid was replaced by a plumber with foresight.

How does a water cistern work?

These cisterns collect rainwater with open tops or gutter systems. They are mounted on platforms or towers that elevate them above a home or garden. The pull of gravity sucks water into irrigation or home plumbing, allowing the cistern to supply water without using power.

Where is a water shut off valve?

The valve is typically located within 3 to 5 feet of where the water main enters the home. If you don’t find it on the front wall, check for a mechanical room, or near the water heater or furnace. In a crawl space or with slab construction, the shut-off valve may be right inside the crawl space.

Is it OK to turn off water supply to toilet?

It’s important to note that turning off your home’s water supply is a crucial step for most plumbing repairs, but it isn’t necessary for every little thing. … It’s recommended you shut off your water when: A pipe, fixture, or appliance is leaking. The toilet is running constantly even after adjusting the parts in the …