Which is better durock or wonderboard

I found that Wonderboard is stiffer than Durock (less floppy) which makes it easier to handle, carrying up stairs, loading etc. It also seemed to have a more consistent cement fill with less voids and less soft and “crumbly” areas than Durock.

What is better than durock?

What is this? HardieBacker is also the go-to choice when it comes to countertops and tile. Durock is too abrasive and can damage vinyl, porcelain, and enamel. HardieBacker does not contain any course materials, so it is the preferable choice.

Is WonderBoard any good?

Particularly for experienced contractors that may be used to cement backerboards, WonderBoard is a clear choice. Unlike other cement backerboards, WonderBoard is not completely stiff. It is flexible, making it a good choice for curved surfaces. WonderBoard is also safer for wet areas than HardieBacker.

What is the best backer board?

Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.

Which backer board is best for floors?

Half-inch cement backer board is ideal for most tiling jobs, including walls, floors, countertops, and ceilings. For flooring, the backer board should be installed over a 5/8-inch thick OSB or plywood base. For countertops, use 3/4-inch plywood beneath the backer board.

Can you Durock 1/4 walls?

3 Answers. 1/4″ hardibacker alone is an unsuitable substrate for shower wall tile. If it were attached to properly waterproofed drywall, plywood, or plaster it would be fine. Think about it, one wayward elbow, knee, or hip bump and you may get flexion which would cause the grout (or tile) to crack.

Is Durock the same as backer board?

Durock and Hardiebacker are two different brands of cement backer boards used in rooms that are susceptible to moisture buildup. While both of these brands offer products that are highly raved about by users, each brand does have their own features that set them apart from each other.

What is durock used for?

USG Durock Brand cement board with EdgeGuard offers architects, builders and tile contractors a strong, water-durable tile base for tub and shower areas. Also an ideal underlayment for tile on floors and countertops in new construction and remodeling. Board is readily applied over wood or steel framing spaced 16 in.

Is durock waterproof?

Liquid-applied waterproofing and crack isolation membrane and vapor retarder ideal for waterproofing showers and other wet areas.

How do you cut durock?

To cut DUROCK Brand Cement Board, mark desired size on the board with a rule and pencil. Score both sides and edges with a utility knife through the glass-fiber mesh, and snap the board to size. Smooth cut edges with wood rasp. Cutting with a circular saw with a car- bide-tipped blade is an alterna- tive.

Article first time published on

Is WonderBoard and durock the same?

I found that Wonderboard is stiffer than Durock (less floppy) which makes it easier to handle, carrying up stairs, loading etc. It also seemed to have a more consistent cement fill with less voids and less soft and “crumbly” areas than Durock.

Is WonderBoard waterproof?

WonderBoard® Lite is not a waterproof barrier. If the area behind the backerboard must be kept dry, use RedGard® Waterproofing and Crack Prevention Membrane or Custom® 9240 Waterproofing and Anti-Fracture Membrane Do not use drywall fiberglass tape for this product.

What is similar to WonderBoard?

Types of cement backer board Permabase is National Gypsum’s product and it is very much like WonderBoard from Custom Building Products. Both of these boards are a cement and aggregate core with a fiberglass mesh “skin.” Durock from USG is a slightly lighter weight version of comparable construction methods.

Is durock fireproof?

A Durock panel with a thickness of 1/2 or 5/8 inch can provide two hours of fire protection when installed correctly and in conjunction with all fireproofing construction materials. …

How thick should my cement board be?

Cement backer board comes in two standard thicknesses, 1/2 inch and 1/4 inch. The industry standard is to use 1/2-inch-thick backer board on wall tile installations, such as a tub surround.

What is the thinnest backer board for tile?

It does suggest that 1/4-inch cement backerboards are generally useful for the underlayment of tiled floors.

Does durock need a vapor barrier?

I called USG,the maker of Durock cement board Next Gen, and they advised using no vapor barrier so that the wall cavity can breath and allow any moisture to evaporate. Their online instructions/diagrams show no use of a vapor barrier.

Do you need to waterproof cement backer board?

Although most backerboards currently available won’t fall apart when exposed to moisture and are somewhat water-resistant, they aren’t waterproof. To prevent moisture from seeping through to the wood or metal studs beneath the tile, a barrier or sealant must be used on porous materials.

Can you use durock for shower walls?

Installing cement backerboard is one of the more popular choices for a shower wall substrate. Cement backerboards include Hardiebacker, Durock, Fiberboard, wonderboard, and similar products. … When installed properly they will give you many, many years of durable shower construction.

How thick is WonderBoard?

When using 7/16″ WonderBoard Lite, base should be a minimum of 5/8″ thick. The total wood subfloor including the plywood and WonderBoard Lite should be a minimum of 1″ thick.

Which cement board is waterproof?

HardieBacker® Cement Board with HydroDefense™ Technology is a long-lasting, waterproof solution for walls, floors, and countertops. WEIGHT: 2.6 lb/sq. ft.

Do I need RedGard over durock?

You really don’t need the RedGard, but the more protection the better…so go for it. And yes, you can do the boards beforehand. But, hit the filled seams & screws (your weak points) as soon as a panel is ready to give it some time to setup. You’ll have to wait for the fills to dry or at least setup anyway.

Can durock be used outside?

Can USG Durock® Brand Cement Boards be used on the interior and exterior of buildings? Yes. They can also be used in below-grade applications such as basements.

Do you need waterproofing on durock?

Durock (USG): If waterproofing is desired, use USG Durock™ Tile Membrane or USG Durock™ Brand Waterproofing Membrane. Hardiebacker (James Hardie): the use of a waterproof membrane, vapor barrier or vapor. retarding membrane is optional unless the local building code requires it.

How long does durock last?

90 days. Discoloration or staining may occur due to exposure to the elements and will not affect performance of the panel. 5. Brittle coatings, such as epoxy coatings, are not recommended for use with USG Durock® cement board.

Who makes durock?

For more than 30 years, USG Durock® Brand Cement Board has set the standard for proven performance in the backerboard category. The new USG Durock® Brand Cement Board with EdgeGuard™ offers enhanced, proprietary edge performance and minimizes spin-out and crumbling.

How far apart are screws in durock?

Fasten panels to subfloor while the adhesive is wet with 32 mm (1-1/4″) CGC Durock Wood Screws or 38 mm (1-1/2″) hot-dipped galvanized roofing nails spaced 203 mm (8″) o.c. in both directions.

Can you score and snap durock?

This durable material resists moisture and mold, making it ideal for bathrooms and high-humidity areas. It’s also stronger than plywood, making it useful for floor, wall and countertop installations. You can cut by scoring and snapping or by using a circular saw for straight cuts and hole saws or jigsaws for cutouts.

Can you use drywall screws on cement board?

You don’t want to use regular drywall screws for cement boards. They can corrode, they can break down the edges of the boards, and they won’t drive in flush properly. Use ITW’s ROCK-ON and BACKER-ON screws instead.

What screws do you use for durock?

DUROCK Steel Screws, 32 mm (1-1/4) long, are used for applying 12.7 mm (1/2) DUROCK Cement Board to walls or ceilings. D. DUROCK Steel Screws, 42 mm (1-5/8) long, are used for applying 15.9 mm (5/8) DUROCK Cement Board to walls or ceilings.